Produits

The transformer tank is the housing of the transformer in which the transformer core and windings are installed and filled with transformer oil. The transformer tank is usually equipped with a radiator. The transformer tank protects the internal parts and dissipates heat.

For three phase floor mounted transformer tanks, the transformer windings, cores, high voltage load switches and fuses can be placed in the floor mounted tank.

Material

SS400 (iron), SS304, SS304L, can be customized according to customer requirements.

Advantage

1.The fuel tank is made of 2.5 mm thick material, and the tank cover is made of 2.0 mm thick material. Q235 cold plate is used for all materials. The film thickness is generally 80-120 microns, and special requirements can reach 160 microns.

2. Surface line spraying

3. Altitude: not more than 1,000m;

4. Ambient temperature: not higher than + 40 ℃, not lower than -25 ℃, daily average temperature difference not greater than 35 ℃, annual average temperature difference not greater than 20 ℃;

5. The wind speed shall not exceed 35m/s; the installation site shall be free of explosion hazard, chemical corrosion and severe vibration;

6.Cooling method: natural air cooling (AN).

Processing Technology of Three-phase Floor Type Transformer Oil Tank

1. Adopt mechanical arm welding technology

2. Punching leak detection method

3. Surface treatment, anti-corrosion and anti-radiation primer + flour